Hardware Manuals


Pioneer DJ - DDJ-XP2 - Layout  

EFFECTS



  1. FX1: When enabled (LED lit), the FX LEVEL touch-strip will apply on the selected Effect of FX Slot 1.
    Hold SHIFT down and then use this button to select the next available Effect for the FX Slot 1

  2. FX2: When enabled (LED lit), the FX LEVEL touch-strip will apply on the selected Effect of FX Slot 2.
    Hold SHIFT down and then use this button to select the next available Effect for the FX Slot 2

  3. FX3: When enabled (LED lit), the FX LEVEL touch-strip will apply on the selected Effect of FX Slot 3.
    Hold SHIFT down and then use this button to select the next available Effect for the FX Slot 3

  4. FX LEVEL: Touch and slide this touch-strip to adjust the 1st Parameter of the selected FX Slot(s) and activate the Effect(s), as long as the touch-strip is held.

  5. HOLD: When enabled, the Effect(s) will remain active after the touch-strip is released. Press this button again to turn the effect(s) off.


    Notes :
    - When no FX Slot is selected, the LEDs of the FX1, FX2 and FX3 buttons will flash if the touch-strip is used, indicating that at least one FX Slot needs to be selected.
    - When more than one FX Slots are selected the level of the effect is the same for all effects
    - When more than one FX Slots are selected the order of activation (chain effects) is always FX Slot 1, then FX Slot 2, then FX Slot 3

Pads