Novation - Launchpad Pro  

EFFECTS MODE

Press the top NOTE button, to set the device to Effects mode.
In this mode, the 32 left-side Pads along with the 4 left-side bottom buttons control the Effects on Left deck and the right-side pads and buttons, the Effects on the Right deck.

PADS

Press a pad to adjust the value of the Parameter of the selected Effect. The speed that the value will increase/decrease to the set value, depends on the velocity (how hard the pad is initially pressed).
The leds of the pads inside a column represent the current value of the Effect parameter in 2 patterns. Most of the Effect parameters have their "off" value at the minimum 0% and those get the "volume-style" pattern. Some others, have their "off" value at the middle, and those get the "pan-style" pattern where the 2 middle leds represent the center/off value.

KEY

ACTION

SHIFT ACTION

PAD COLUMN 1

Adjust the 1st Parameter of the selected Effect on Left deck

PAD COLUMN 2

Adjust the 2nd Parameter of the selected Effect on Left deck

PAD COLUMN 3

Adjust the 3rd Parameter of the selected Effect on Left deck

PAD COLUMN 4

Adjust the 4th Parameter of the selected Effect on Left deck

PAD COLUMN 5

Adjust the 1st Parameter of the selected Effect on Right deck

PAD COLUMN 6

Adjust the 2nd Parameter of the selected Effect on Right deck

PAD COLUMN 7

Adjust the 3rd Parameter of the selected Effect on Right deck

PAD COLUMN 8

Adjust the 4th Parameter of the selected Effect on Right deck

TOP BUTTONS

KEY

ACTION

SHIFT ACTION

T1 ARROW UP

Select the previous available Mixer panel in the default VirtualDJ GUI (Audio mixer, Video, Scratch panel and Master panel)

T2 ARROW DOWN

Select the next available Mixer panel in the default VirtualDJ GUI (Audio mixer, Video, Scratch panel and Master panel)

T3 ARROW LEFT

Moves the Crossfader to the left by 5% each time its pressed. Hold down to repeat the movement every 100 ms

Moves the crossfader to the far more left position

T4 ARROW RIGHT

Moves the Crossfader to the right by 5% each time its pressed. Hold down to repeat the movement every 100 ms

Moves the crossfader to the far more right position

T5 SESSION

Selects the Sampler (default) mode

T6 NOTE

Selects the (current) Effects mode mode

T7 DEVICE

Selects the Mixer mode mode

T8 USER

Selects the User's mode mode

LEFT BUTTONS

KEY

ACTION

SHIFT ACTION

L1 SHIFT

Press and hold down to access secondary actions, as described in the SHIFT ACTIONS column

L2 το L8

Not assigned

RIGHT BUTTONS

KEY

ACTION

SHIFT ACTION

R1 το R8

Not assigned

BOTTOM BUTTONS

KEY

ACTION

SHIFT ACTION

B1 RECORD ARM

Enable/disable the selected Effect on Left Deck

B2 TRACK SELECT

Select the previous available Effect for Left Deck

B3 MUTE

Select the next available Effect for Left Deck

B4 SOLO

Open/close the FX GUI of the selected Effect for Left Deck (a small window is attached to the right side of the Browser with all the Parameters and details of the Effect)

B5 VOLUME

Enable/disable the selected Effect on Right Deck

B6 PAN

Select the previous available Effect for Right Deck

B7 SENDS

Select the next available Effect for Right Deck

B8 STOP CLIP

Open/close the FX GUI of the selected Effect for Right Deck (a small window is attached to the right side of the Browser with all the Parameters and details of the Effect)

Mixer mode