Reloop - Terminal Mix 4 - Layout  

MIXER & BROWSER

27. CROSSFADER. Blends audio between the channels assigned to the left and right side of the crossfader.
    
    
28. VOLUME. Adjust the Volume of each channel.
    
    
29. LOAD. Press these buttons to load the selected track from the Browser to decks 1 to 4. The LED of the button will be on if the deck is loaded. Hold the same button for more than 2 seconds to unload the same deck.
    
    Hold SHIFT down and then press one of these buttons to enable the Fader Start on a deck.
    
    
30. PFL. Press these buttons to send one (or more) channel to the Headphones Output channel.
    
    
31. FILTER. Use this knob to apply a High/Low Pass Filter to the deck. In middle position no filter is applied.
    
    
32. EQ LOW. Adjust the Low (Bass) frequencies for each mixer channel.
    
    
33. EQ MID. Adjust the Mid frequencies for each mixer channel.
    
    
34. EQ HIGH. Adjust the High (Treble) frequencies for each mixer channel.
    
    
35. GAIN. Adjust the Gain of each mixer channel.
    
    
36. MASTER VOLUME. Adjust the level of the Master Output of the TM4 Audio Interface. Hardware operation - movement not visible on the VirtualDJ GUI
    
    
37. BOOTH VOLUME. Adjust the level of the Booth Output of the TM4 Audio Interface. Hardware operation – movement not visible on the VirtualDJ GUI.
    
    
38. HEAPHONES LEVEL. Adjust the Volume of the Headphones Output of the TM4 Audio Interface. Hardware operation – movement not visible on the VirtualDJ GUI.
    
    
39. HEADPHONES MIXING. Adjust how the Channels and the Master Output blend at the Headphones Channel.
    
    
40. SAMPLER VOLUME. Adjust the Master Output Volume of the VirtualDJ Sampler
    
    
41. CRATES. Cycles through the views of the Sideview (Automix, Sidelist, Sampler, Karaoke and Clones). Hold SHIFT down and then press this button to show/hide the Sideview.
    
    
42. VIEW Cycles through the available Center Mixer panels of the default VirtualDJ GUI (Mixer, Video, Scratch and Master). Hold SHIFT down and then press this button to show Browser Zoom view.
    
    
43. BACK. Set focus to the previous Browser Window (Folders List, Songs List and Sideview).
    
    
44. PREPARE. Add the selected track to the Automix List. Hold SHIFT down and then press this button to add the selected track to the Sidelist.
    
    
45. BROWSE ENC. Scroll through files of folders. Push the encoder to enter the Songs List (if focus is on the folders list) or load the selected track to the first available deck. Hold SHIFT down and then push the encoder to set focus to the Folders list or open/close the subfolders if focus is on the Folders list already.
    

Front & Rear