Input/Output Controls

KEY

ACTION

33 MIC 1 VOLUME

Adjust the volume of the microphone 1 input (located on the rear side of the device)

34 MIC 1TONE

Adjust the tone (single band equalizer) of the microphone 1 input.

35 MIC 1 VUMETER

Shows the incoming signal level of microphone 1 input.

36 MIC 1 DUCK

Enables ducking (also knows as talk over) for microphone 1 input.
When Duck is active, the volume of mixer channels is automatically lowered when the microphone receives signal.

37 MIC 1 ECHO

Applies an Echo effect on microphone 1 input

38 SESSION IN

Adjusts the volume of the incoming signal on "Session" input on the rear of the device.

39 SESSION IN CUE (PFL)

Sends the signal of the "Session" input on the headphones channel for pre-listening.

40 SAMPLER VOLUME

Adjusts the volume of the Sampler.

41 SAMPLER HP/LP FILTER

Applies a High-pass/Low-pass resonance filter on the output of the sampler. Middle position is OFF position (no filter applied).

42 SAMPLER VUMETER

Shows the incoming signal level of the sampler.

43 SAMPLER FLEX FX

Sends the sampler output to the unit's FLEX FX effects.

44 MASTER VOLUME

Adjusts the volume of the master output of the device.

45 MASTER VUMETER

Shows the strength of the signal on the master output.

46 BOOTH VOLUME

Adjusts the volume of the booth output of the device.

47 SESSION OUT VOLUME

Adjusts the volume of the "Session" output of the device.

48 HEADPHONES VOLUME

Adjusts the volume of the headphones channel.

49 HEADPHONES MIXING

Blends the audio that's being sent on the headphones channel between the headphones signal (far left) and the master output signal (far right).

50 HEADPHONES SPLIT

Splits the audio that's being sent on the headphones to headphones signal (left channel) and master output signal (right channel).

Please note that all these operations are hardware operated. Front & Rear