Gemini - G2V  

CONTROLS

KEY

ACTION

SHIFT (SECONDARY) ACTION

S SHIFT

Hold this button down to access secondary actions as described in the SHIFT ACTION column.

1 CROSSFADER

Blends audio between the channels assigned to the left and right side of the crossfader

2 VOLUME

Adjust the Volume of each channel.

3 CUE (PFL)

Send each channel to the Headphones Output channel

4 FILTER

Apply a lowpass to highpass resonance filter effect on each channel's sound. Middle position (12 o clock) deactivates the filter effect

5 EQ LOW

Adjust the low frequencies for each mixer channel

6 EQ MID

Adjust the mid frequencies for each mixer channel

7 EQ HI

Adjust the high frequencies for each mixer channel

8 GAIN

Adjust the Gain of each mixer channel. Note that the "zero gain / park" position is 12 o clock.

9 CH INPUT VUMETER

Shows each channels input (pre fader) volume

10 CROSSFADER CH ASSIGN

Define if a mixer channel will be output regardless of the position of the crossfader (All buttons OFF) or it's Left/Right side (Buttons ON)

11 MASTER OUTPUT VUMETER

Shows the master output volume of the unit

12 HEADPHONES MIXING

Adjust how the Channels and the Master Output blend at the Headphones Channel

13 BOOTH MONITOR

Adjust the level of the Booth Output

14 MASTER VOLUME

Adjust the level of the Master Output

15 BACK

Cycles focus between Folders, Songs and the Sideview

Cycles through the available views of Sideview (Automix, Sidelist, Sampler, Karaoke and Clone views)

16 BROWSE

Scrolls through files or folders

17 LOAD

Load the selected track on the corresponding deck

Unload the deck

19 PITCH

Controls the track's playback tempo

20 VINYL MODE

Toggle the JOGWHEEL between Scratch and Pitch Bend modes

Toggle the JOGWHEEL between "Search" mode (to seek position inside the track) and normal operation.

21 JOGWHEEL

Touch sensitive platter for scratching (vinyl mode), bending (CD Mode) or Seeking

22 CUE

When the Deck is paused, you can set a temporary Cue Point by moving the Platter to place the Audio Pointer at the desired location and then pressing the Cue Button. During playback, you can press the Cue Button to return the track to this Cue Point. (If you did not set a Cue Point, then it will return to the beginning of the track.). If the Deck is paused, you can press and hold the Cue Button to play the track from the Temporary Cue Point. Releasing the Cue Button will return the track to the temporary Cue Point and pause it. To continue playback without returning to the Temporary Cue Point, press and hold the Cue Button, then press and hold the Play Button, and then release both buttons

23 CUP

Stops the deck while held down, and starts the playback once released

24 PLAY/PAUSE

Plays / Pauses the track

25 SYNC

Automatically match the corresponding Deck's tempo with the opposite Deck's

26 PAD MODES

Selects a Pad Page (Hotcues, Loop, Sampler, Loop Roll and Manual Loop)
For further details see Pads section of VirtualDJ 8 Manual

27 PADS

Offer different functionality depending on the selected Pad Page for the Left and/or Right Deck
For further details see Pads section of VirtualDJ 8 Manual

Offer different functionality depending on the selected Pad Page for the Left and/or Right Deck
For further details see Pads section of VirtualDJ 8 Manual

28 KEYLOCK

Locks the track's pitch to the current key

Cycle through the available pitch range values

29 SAMPLER BANK SELECT

Select the next Sampler Bank

Select the previous Sampler Bank

30 FX SELECT

Select the next available effect

31 FX ON

Select the next available effect

32 LOOP MOVE

Moves the loop

33 SAMPLER VOLUME

Adjusts the volume of the sampler

34 FX PARAMETER 1

Controls the 1st parameter of the selected effect

35 FX PARAMETER 2

Controls the 2nd parameter of the selected effect

---

For further Technical features and specifications, visit
GEMINI G2V
Product's Page

---

Hardware Integration Department 2016 - ATOMIX PRODUCTIONS