S SHIFTPress this button down to access secondary actions as described in the SHIFT ACTION columnD DECK CHGSelect a deck for the unit to control When a single unit is used, the unit can be assigned to Left or Right Deck When 2 units are available and a 4 Decks skin is used, the Left unit will toggle control for Left Decks (Deck 1 and 3) and the Right unit will toggle control for the Right Decks (2 and 4)1 PLAYPlay/pause deck2 CUEWhen track is paused, sets a temporary Cue point and previews track while pressed if the Cue is set. When track is playing, it will return and stop at the Cue point.3 SEEK <<Moves the track backwards in time by 4 beats while button is pressedSets Jogwheel to Vinyl/Scratch mode 4 SEEK >>Moves the track forward in time by 4 beats while button is pressedSets Jogwheel to Bend/CD mode 5 JOGTouch-sensitive platter (jogwheel) to scratch or bend, depending on the Vinyl mode.
When in Scratch/Vinyl mode, use the top of the platter to scratch and the outer ring to bend When in Loop In Adjust mode, use the jogwheel to fine adjust the Loop In (Start) point of a manual loop. When in Loop Out Adjust mode, use the jogwheel to fine adjust the Loop Out (End) point of a manual loop. When in Loop Move Adjust mode, use the jogwheel to fine move the Loop through track's timeFast search (seek) through track's time6 PITCHAdjust the Tempo (BPM) of the track7 PITCH BENDTemporary slow-down/speed-up Track's tempo. When button is released, the track will resume to the tempo designated by the PITCH fader8 KEYLOCKEnable/disable Key-Lock (Master Tempo). When enabled track's key will retain it's value while the tempo is changed9 SYNCMatch track's Tempo (BPM) and Beat-grid phase with the ones from the Master Deck (the opposite deck when 2 decks are only used)Manual set the Deck as Master Deck (all other Decks will sync to the Master Deck) 10 HOTCUES 1-4In Hotcue mode : Assign a Hotcue 1 to 4 or jump to that Hotcue (if assigned) In Sampler mode : Triggers a Sample 1 to 4 from the selected Sampler BankIn Hotcue mode : Deletes the assigned Hotcue 1 to 4 In Sampler mode : Stops the Sampler 1 to 4 from the selected Sampler Bank 11 SELToggles between Hotcue and Sampler mode for the HOTCUE buttons When the Hotcue mode is selected (default selection), the LEDs of the Hotcue buttons will illuminate amber and will be illuminated green when the Sampler mode is sleected12 LOOPINSets a Loop In (Start) point for a manual loop.Sets jogwheel to Loop In Adjust mode (Led will blink) 13 LOOPOUTSets a Loop Out (End) point for a manual loop. Exits the loop when loop is enabledSets jogwheel to Loop Out Adjust mode (Led will blink) 14 LOOP -Halves the size of the loopWhen loop is enabled, moves the loop backwards in beats equal to the size of the loop 15 AUTO LOOPEnables/disables an Auto-loop of the selected size in beatsSets the jogwheel to Loop Move Adjust mode (led will blink) 16 LOOP +Doubles the size of the loopWhen loop is enabled, moves the loop forward in beats equal to the size of the loop 17 FILTERApplies a Low/High-Pass Filter to deck Push to activate/de-activate the FilterMove track's Key one semitone up/down Push to set track's key to its original value (reset)18 BROWSERToggles between normal Browser view and Browser Zoom mode (with large Browser and mini decks)Shows/hides the Sideview split panel of the Browser 19 PREVIOUSSets focus to the previous Browser windowSelects the previous available view for the Sideview20 TRACK SELECTScroll though files
Push to load the selected track from the Browser to the deck. When in Folders list, push to select the next folder (sub-folder) when folder has no tracks or set focus to the Songs list when folder has tracksScrolls through folders.
When in Folder list, push to expand/collapse sub-folders. Set focus to the Folders list if not.21 NEXTSets focus to the next Browser windowSelects the next available view for the Sideview22 DUPLICATEClones the track of this deck to the opposite deck23 FX 1/2FX1 : Triggers the Flanger Effect FX2 : Triggers the Beat Grid EffectFX1 : Triggers the BrakeStart Effect FX2 : Triggers the Backspin Effect 24 FX UNITToggles between the Single and Multi FX modes25 FX DRY/WETIn Single FX mode : Selects the next/previous Effect Push to activate/de-activate the selected Effect
In Multi FX mode : no functionIn Single FX mode push to dock/un-dock the FX GUI of the selected effect in Browser
In Multi FX mode : no function 26 FX PARAM1In Single FX mode : Adjust the 1st arameter of the selected Effect Push to activate/de-activate the Effect button 1 of the selected Effect
In Multi FX mode : Adjust the 1st Parameter of the selected Effect of FX Slot 1 Push to activate/de-activate the selected Effect of FX Slot 1In Single FX mode : Adjust the 4th Parameter of the selected Effect
In Multi FX mode : Select the Effect for the FX slot 1 27 FX PARAM2In Single FX mode : Adjust the 2nd Parameter of the selected Effect Push to activate/de-activate the Effect button 2 of the selected Effect (if available)
In Multi FX mode : Adjust the 1st Parameter of the selected Effect of FX Slot 2 Push to activate/de-activate the selected Effect of FX Slot 2In Single FX mode : Adjust the 5th Parameter of the selected Effect (if available)
In Multi FX mode : Select the Effect for the FX slot 2 28 FX PARAM3In Single FX mode : Adjust the 3rd Parameter of the selected Effect Push to activate/de-activate the Effect button 3 of the selected Effect (if available)
In Multi FX mode : Adjust the 1st Parameter of the selected Effect of FX Slot 3 Push to activate/de-activate the selected Effect of FX Slot 3In Single FX mode : Adjust the 6th Parameter of the selected Effect (if available)
In Multi FX mode : Select the Effect for the FX slot 3
For further Technical features and specifications, visit
