Behringer - CMD Studio 4a  

CONTROLS

KEY

ACTION

1 CUE

When track is paused, sets a Temporary Cue point and previews the track while pressed. Jumps to the assigned Cue point when track is playing

2 PLAY

Play-pause Left/Right Deck

3 SYNC

Matches Tempo and Phase of the Left/Right Deck with the values of the opposite Deck

4 HOTCUES 1-8

Assign a Hotcue 1 to 8 or jumps to the Hotcue (if assigned) to the Left/Right deck. When DEL button is pressed, the buttons delete the assigned Hotcue

5 DEL

Hold down and then press a Hotcue button to delete its assigned Hotcue

6 PITCH BEND

Temporary slow-down/speed-up track. Tempo will resume to the value designated by the Pitch fader when the button is released

7 PITCH

Adjust the tempo (BPM) of the track

8 LOCK

Lock track's Key and not allow changing when Tempo is changes (Master Tempo)

9 JOG

Touch-sensitive jogwheel for scratch or Bend, depending on the Vinyl/CD mode

10SCRATCH

Sets Jogwheel to Vinyl (Scratch) mode when enabled and to Bend (CD) mode when disabled

11DECK A/C B/D

Selects which VirtualDJ Deck will be controlled from the Left/Right side of the unit. The Left buttons assign Decks 1 and 3 to the left side of the unit, and right buttons assign Decks 2 and 4 to the right side of the unit

12LOOP <

Halves the size of the Loop

13LOOP >

Doubles the size of the Loop

14LOOP

Enables/disables an Auto-Loop of the selected size in beats

15FX 1

Enables/disables the selected Effect

16FX 2

Enables/disables the 1st FX Button (if available) of selected Effect

17FX 3

Enables/disables the 2nd FX Button (if available) of selected Effect

18FX 4

Enables/disables the High/Low-Pass Filter. When disabled, the Filter knob has no effect in sound

19FX KNOB 1

Selects the previous/next available Effect

20FX KNOB 2

Adjusts the 1st Parameter of the selected Effect

21FX KNOB 3

Adjusts the 2nd Parameter of the selected Effect

22FX KNOB 4

Applies a High/Low-Pass Filter

23ENTER

When focus is in Folders list, opens/closes sub-folders.
When focus is in Songs list, adds the selected track to the Automix List.

24BROWSER </>

Set focus to the previous/next Browser window.

25BROWSE

Scrolls through folders or files depending on the selected Browser window.

26LOAD

Loads the selected track from the Browser to the Left/Right Deck

27FX ASSIGN 1/2

Trigger the assigned actions to Custom Buttons 1 and 2

28 HIGH

Adjust the High (Treble) Equalizer Band for the Left/Right assigned decks

29 KILL HIGH

Cuts (Kills) the High (Treble) Equalizer Band for the Left/Right assigned decks

30 MID

Adjust the Middle Equalizer Band for the Left/Right assigned decks

31 KILL MID

Cuts (Kills) the Middle Equalizer Band for the Left/Right assigned decks

32 LOW

Adjust the Low (Bass) Equalizer Band for the Left/Right assigned decks

33 KILL LOW

Cuts (Kills) the Low (Bass) Equalizer Band for the Left/Right assigned decks

34 PHONES

Sends Left/Right assigned deck's audio signal to the Headphones Channel for pre-listening

35 VOLUME

Adjusts the Output Volume of the Left/Right assigned Deck

36CROSSFADER

Blends audio signals from the Decks assigned to the Left and Right side of the crossfader (by default Decks 1 and 3 are assigned to theLeft side and Decks 2 and 4 are assigned to the right side)

37MAIN LEVEL

Adjusts the Volume of the Master Output Channel

---

For further Technical features and specifications, visit
Behringer CMD Studio 4a
Product's Page

---

Hardware Integration Department 2016 - ATOMIX PRODUCTIONS


Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.