CONTROLS

The Allen & Heath Xone 43C is a hardware, stand-alone mixer applying its own audio mixing, Equalizer and FXs with a very limited MIDI functionality. Only the numbered keys as shown in the image below are sending MIDI, and those are either unassigned or assigned in fake mode.

For the hardware and mixing features of the device, please refer to Allen & Heath Xone 43C Manual. https://www.allen-heath.com/ahproducts/xone43c/

KEY

ACTION

S SOURCE

Mixer Channel Source:
Set to PHONO or LINE to send the audio signal from the devices connected to the rear panel Inputs.
Set to USB to send the audio signal from the VirtualDJ Deck

1 VOLUME

Adjust the Output Volume of each Mixer Channel. When a Mixer Channel is in USB, moving the Fader from the Xone 43C will also move the VirtualDJ Mixer Volumes , but not vice-versa (fake mode)

2 CUE

Send the pre-fader audio signal to the Headphones Channel of the Xone 43C. Hardware operation, button sends MIDI but not assigned to any VDJ script action.

3 FILTER ON

Hardware Operation, button sends MIDI but not assigned to any VDJ script action.

5 MIC CUE & ON

Hardware Microphone Operations, buttons sends MIDI but not assigned to any VDJ script action.

6 XFX & PF

Hardware Microphone Operations, buttons sends MIDI but not assigned to any VDJ script action.

Advanced Setup