RELOOP BEATMIX





for VirtualDJ 8.0
Last Update : July 2016
 

SETUP


Step 1. Connections


Connect the Reloop Beatmix with your computer using the provided USB cable. Connect your Headphones to the front socket and your amplifier/amplified speakers to the Master Out socket at the rear side using an RCA cable.

Step 2. Drivers


Windows : Install the Reloop ASIO drivers from http://www.reloop.com/reloop-beatmix
Mac OSX : No drivers are required to be installed

Step 3. VirtualDJ


Install VirtualDJ 8 from http://www.virtualdj.com/download/index.html (in case you have not done already)

Start VirtualDJ and login with your Account credentials. A Pro Infinity, Pro Subscription or Plus Beatmix Controller License is required.

Detection Window
Click to “Use Soundcard”. VirtualDJ will automatically create the necessary audio configuration.

Click to OK
 

CONTROLS





KEY

ACTION

SHIFT (SECONDARY) ACTION

S SHIFT
Press this button down to access secondary actions as described in the SHIFT ACTION column
1 CROSSFADER
Blends left-right assigned audio signals
2 VOLUME FADER
Adjust Deck Output Volume
When Fader Start is enabled, plays the track from the current position when moved from minimum to any other position.
3 LOAD
Load selected track to Deck. Hold down for +1 sec to unload
Left button : Turn Video Transition mode on/off (led will blink)
Right button : Turn Video Effect mode on/off (led will blink)
4 TRAX
Default mode : Scroll through files and folders
Video Effect mode : Select Video Effect
Video Transition mode : Select Video Transition
Default mode : same as un-shifted
Video Effect mode : Adjust 1st Parameter of Video FX (if available)
Video Transition mode : Adjust 1st Parameter of Video Transition (if available)
TRAX PUSH
Default mode : Toggle focus between Folders and Songs list
Video Effect mode : Enable/disable Video Effect
Video Transition mode : Trigger Video Transition
Default mode : If focus is in Folders list, open/close subfolders. If focus is in Songs list, add track to Automix
Video Effect mode : Dock Video Effect GUI in Browser
Video Transition mode : Dock Video Transition GUI in Browser
5 LOW
Adjust Equalizer Low (Bass) frequencies
6 MID
Adjust Equalizer Mid (Middle) frequencies
7 HIGH
Adjust Equalizer High (Treble) frequencies
8 GAIN
Adjust pre-fader Output level
9 MASTER VOL
Adjust Master Output Volume
10 PHONES VOL
Adjust Headphones Channel Volume
11 PHONES CUE/MIX
Blends audio signal from Master Volume (when in maximum) and Deck output (when in minimum) in Headphones
12 SYNC
Match BPM and phase with opposite deck
Stop track at the beginning
13 CUP
Sets temporary Cue. Return to Cue and play when released
Manual beat Tap
14 CUE
Sets temporary Cue. Return to Cue and preview while pressed
Enable/disable Fader Start
15 PLAY
Play/pause track
Enable/disable Keylock (Master Tempo)
16 HOTCUES (1-3)
Assign (if not set) and trigger Hotcues 1 to 3
Delete Hotcues 1 to 3
17 PITCH BEND
Temporary slow-down/speed-up track
Jump track 1 beat backwards/forward
18 JOG
Touch-sensitive jogwheel for scratch (when in Vinyl mode) bend (when in Bend mode) or Search (when in Seek mode)
19 SCRATCH
Toggle between Scratch (Vinyl) and Bend (CD) mode
20 SEARCH
Enable/disable Search (Seek) mode for the Jogwheel
21 PFL
Send Deck's audio signal to Headphones channel (for monitoring)
22 PITCH
Adjust track's tempo
23 FX ON
Enable/disable selected Effect
Trigger selected Sample
24 FX SEL
Select Effect
Push: Dock selected Effect's GUI in Browser
Select Sample
Push : Toggle between On/Off and Hold Sampler Trigger mode
25 FX PARAM2
Adjust 2nd Parameter of Selected Effect
Adjust Volume of selected Sample
26 FILTER
Apply High/Low Pass Filter
Adjust 1st Parameter of selected Effect
27 BEATMASH
Enable/disable Beat Grid effect
Set Loop In (Entry) point
28 AUTLOOP
Triggers selected Loop or exit loop if enabled
Set Loop Out (Exit) point
29 LOOP SIZE
Half/double Loop size
Push: Trigger selected loop
Move Loop backwards/forward by 1 beat


 

INPUTS & OUTPUTS





CONNECTION

DESCRIPTION

30 MIC INPUT
Connect a Microphone
31 MIC VOLUME
Adjust Microphone Volume
32 MIC ROUTING
Off : Microphone Output muted
SW : Microphone signal passes to Software (for recording Microphone)
THRU : Microphone Signal is routed directly to Master Output
33 PHONES SOCKET
Connect Headphones for monitoring




34 JOG SENSITIVITY
Adjust touch-sensitivity for left and right jogwheels
35 MASTER OUT
Master Output Socket. Connect amplifier or amplified speakers using RCA cables
36 BOOTH/REC OUTPUT
Additional Output socket to connect speaker for booth monitoring or send Master Output to Recording device
37 USB
USB port. Connect unit with a computer, using the provided USB cable








Hardware Integration Department
2016 - ATOMIX PRODUCTIONS



Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.